we are receiving a number of installer enquiries from people wanting to
be listed on our site. Please be assured that they will be attended to
as soon as possible.

3ABN have a new frequency in Australia and NZ of 12546 on the D2 Satellite. For more details, check out their tuning guides at www.3abnaustralia.org.au/installation/retune.php

Many people are choosing to install the dish themselves and then get an installer to fine-tune the alignment of the dish. Most installers are happy to help in this way for a standard realignment fee.

However, if you want to set up your own system, check out our FAQ for details.

Downlink details from Optus D2 are

• Frequency 12546
• FEC 3/ 4
• Symbol Rate 22500
• Vertical Polarisation

For further details contact your nearest installer (see the search facility on the top right of this page)

GlobeCast Australia will be looking to migrate its transponders onto the D2 satellite early in the morning of January 15, 2008. There will be a frequency change for all transponders, however, GlobeCast Australia has established a home frequency that all viewers can tune to. This home frequency will list all transponders operated by GlobeCast Australia.

In the past, viewers have had to load individual transponder details to view new channels. By establishing a home frequency you will only need to log into one frequency to access all channels broadcast on the GlobeCast Australia platform.
The new parameters will be available from 6am on : January 15, 2008 - Sydney Time
Frequency: 12707
Polarity: Vertical
Symbol Rate: 22500
FEC: 3 / 4
"Network Search" must be set to "enabled' or "on" so that it can load all available channels.

Globecast have released a series of guides on how to re-tune your receiver.
If yours is not listed, then you may even be able to contribute. If you
have a guide, email it to us and we will post it here on christiansattv.com.
http://www.globecastaustralia.com/Set-Top-Box+Retuning